Tapping Saddle

Polyware Polyfuse Electrofusion tapping saddle is used to tap into a HDPE pipeline.

Reducing Tee

Polyware Polyfuse Electrofusion An electrofusion reducing tee is used to tee off a HDPE pipe, to add in a smaller size outlet to a PE pipe.

Equal Tee

Polyware Polyfuse Electrofusion An Electrofusion Equal Tee is used to split a HDPE pipe into two outlets at right angles to the end of the original pipe, or to add in an outlet to a HDPE Pipe.

Elbow 90°

Polyware Polyfuse Electrofusion A 90° electrofusion elbow is used to join two lengths of poly pipe on an angle of 90° .

Elbow 45°

Polyware Polyfuse Electrofusion A 45° electrofusion elbow is used to join two lengths of poly pipe on an angle of 45°.

Electrofusion Reducing Coupler

Polyware Polyfuse Electrofusion An electrofusion reducing coupler is used to join two lengths of poly pipe that are of different diameters.

End Cap

Polyware Polyfuse Electrofusion An electrofusion end cap is used to cap off the end of a HDPE pipe.

Coupler

Polyware Polyfuse Electrofusion coupler is used to join two lengths of poly pipe in a straight line.

Reducing Nipple

Polyware Penguin Reducing nipple is a short piece of pipe with two male threaded ends of different sizes.

Nipple

Polyware Penguin Nipple is a short length of pipe with threaded ends used to connect two fittings or pipes together.